Tower Numerics tnxTower v8.0.5.0信号塔架钢结构建模设计软件

软件简介

该程序使用ANSI / TIA-222-H标准或回溯到RS-222(1959)的任何以前的TIA / EIA标准对塔进行分析。使用TIA / EIA标准,AISC ASD第9版或AISC LRFD规范检查钢的设计。加拿大标准CSA S37-01也可用。tnxTower的快速模型创建工具,3-D框架模型以及自动的风力和冰荷载生成功能只是使该行业标准软件成为所有类型的通讯塔的首选的部分功能。自动创建塔架几何形状,附件,内力,应力和位移的图形显示。广泛的图形图包括物料起飞,剪切矩,腿部压缩,位移,扭曲,进给线,拉杆锚固和应力图。

tnxTower是专门为通讯塔创建的通用建模,分析和设计程序。当前已实现以下标准:RS-222,RS-222-A,RS-222-B,EIA-222-C,EIA-222-D,EIA-222-E,TIA / EIA-222-F,ANSI / TIA-222-G(包括TIA-222-G-1和TIA-222-G-2),ANSI / TIA-222-H和CSA S37-01。

同类产品还要ASM TOWER(破解补丁失效了),TSE TOWER(本站暂无资源,有的小伙伴欢迎分享)

《Tower Numerics tnxTower v8.0.5.0信号塔架钢结构建模设计软件》

功能概述

支持的基本塔类型:

  • 三面或四面拉筋塔
  • 三或四个侧面的自支撑塔
  • 地面安装的单极子(圆形阶梯形,圆形锥形,18面,16面,12面和8面)
  • 三面或四面拉丝单极子

支持的上部天线类型:

  • 三面或四面格子杆
  • 管状极(圆形阶梯形,圆形锥形,18面,16面,12面和8面)
  • 烛台上衣

分析与设计:

  • 自动生成3D框架-桁架,桁架或梁柱塔模型的节点和元素
  • 线性和非线性(P-δ,电缆特性)有限元分析(FEA)
  • 三种模式可用:仅分析,分析和成员检查,或分析和最低重量优化设计
  • 自动确定塔上的压力系数,风压,冰荷载和合力
  • 优化的馈线有效投影面积计算,以最小化所需的风荷载
  • 自动计算馈线屏蔽
  • 计算由于进给管偏移造成的压力中心
  • 自动计算实心圆形和单角构件的K因子
  • 可选的内部进料管线支撑塔
  • 检查或设计塔式构件中的螺栓
  • 导出到RISA-3D以进行其他分析和设计选择

数据输入:

  • 功能强大,易于使用的电子表格,可快速生成模型并进行输入验证
  • 自适应的三级结构定义:基础塔架,上部天线结构和顶部天线杆
  • 拉力电缆的生成具有不同的半径和拉力锚高程
  • 馈线,离散负载(来自天线,安装架和其他配件的负载),碟形天线以及用户定义的负载规格(塔上任何位置)
  • 全面的数据库,包含结构形状,装配体,馈电线,碟形天线,天线,底座和其他附件
  • 强大的数据库管理器,允许跨网络进行完全自定义和同步
  • 单位的灵活选择:美国习惯(十进制或建筑符号)或SI Metric,具有用户控制的显示精度

为了防止翻译出歧义,英语大佬请看这里

The program analyzes towers using the ANSI/TIA-222-H Standard or any of the previous TIA/EIA Standards back to RS-222 (1959). Steel design is checked using the TIA/EIA Standards, AISC ASD 9th Edition or the AISC LRFD Specifications, as applicable. The Canadian Standard CSA S37-01 is available as well. tnxTower’s rapid model creation tools, 3-D frame-truss models and automatic wind force and ice loading generation capabilities are just a few of the features that make this industry-standard software the premier choice for all types of communication towers. Graphical display of tower geometry, appurtenances, internal forces, stresses and displacements are created automatically. Extensive graphics plots include material take-off, shear-moment, leg compression, displacement, twist, feed line, guy anchor and stress plots. tnxTower contains unique features such as True Cable behavior, hog rod take-up, foundation stiffness and much more.

tnxTower is a general-purpose modeling, analysis, and design program created specifically for communications towers. The following Standards are currently implemented: RS-222, RS-222-A, RS-222-B, EIA-222-C, EIA-222-D, EIA-222-E, TIA/EIA-222-F, ANSI/TIA-222-G (including TIA-222-G-1 and TIA-222-G-2), ANSI/TIA-222-H, and CSA S37-01.

Base Tower Types Supported:

  • Three or four sided guyed towers
  • Three or four sided self-supporting towers
  • Ground mounted monopoles (round stepped, round tapered, 18-, 16-, 12-, and 8-sided)
  • Three or four sided guyed monopoles

Upper Antenna Types Supported:

  • Three or four sided latticed poles
  • Tubular poles (round stepped, round tapered, 18-, 16-, 12-, and 8-sided)
  • Candelabra tops

Analysis and Design:

  • Automatic generation of nodes and elements for 3D frame-truss, truss, or beam-column tower models
  • Linear and non-linear (P-delta, cable behavior) finite element analysis (FEA)
  • Three modes available: analysis only, analysis and members check, or analysis and lowest weight-optimized design
  • Automatic determination of pressure coefficients, wind pressures, ice loads and resulting forces on the tower
  • Optimized feed line Effective Projected Area calculations to minimize required wind loading
  • Automatic calculation of feed lines shielding
  • Calculation of center of pressure due to offset feed lines
  • Automatic calculation of K-factors for solid round and single angle members
  • Optional inner feed line support tower
  • Check or design of bolts in tower members
  • Export to RISA-3D for additional analysis and design options

Data Entry:

  • Powerful, easy to use spreadsheets for quick model generation and input verification
  • Adaptable three-level structure definition: base tower, upper antenna structure, and top antenna pole
  • Guy cables generation with varying radii and guy anchor elevations
  • Feed lines, discrete loads (loads from antennas, mounts, and other appurtenances), dishes, and user defined loads specification anywhere on the tower
  • Comprehensive databases of structural shapes, assemblies, feed lines, dishes, antennas, mounts, and other appurtenances
  • Powerful Database Manager, allowing full customization and synchronization across networks
  • Flexible selection of units: US Customary (decimal or architectural notation) or SI Metric, with user-controlled display precision

下载安装

    Instructions:    Unrar and install the application.
     Replace original .exe with the patched one.
     Start the app. Use ANY data to register.

解压密码:shikey.com

抱歉,只有登录并在本文发表评论才能阅读隐藏内容,切记不要恶意刷,否则会被限制,先阅读用户规则,一旦进入黑名单,不可能再放出来。同时注意,暂停在线支付,请联系客服QQ267286513。
  1. leo说道:

    感谢大佬,谢谢

发表回复